|
|
Build Your Online Product Catalogs?
Brief Introduction
DE series single moible purifier adopts the advanced filter technology.
It provides the perfect solution for welding fume, and professionally design for collectiong the welding fume.
So the mobile fume dust purifier provides serives for purifying the fume and dust.
Before welding fume dust goes into the welder's breathing zone, the fume purifier can collect at the weld source.
The filter cartridge further collects the hazardous submicron particles on the surface of nanofiber membrane to
avoid circulatory blowing to factory air.
For matching factory different location installation requirement, the mobile fume dust purifier can separate two kinds
with self-cleaning and without self-cleaning.
Application
The purifier adopts collection of the fume and dust in different production process, such as welding
(arc welding, carbon dioxide arc welding, MAG welding, carbon arc gouging welding, special welding etc.) ,
polishing, cutting, burnishing etc.
Working principle
The fume and dust produced in the operation process is inhaled to the mobile
welding fume purifier through the gas absorption cover due to the gravitation of the fan.
The large particles are separated and intercepted by the pre-filting fire resistance net.
After initial filtration, the fume and dust will arrive at the filter cartridge protective plate and
further obstruction to particles and residual fire fume.
The filtered fume and dust enters the main filter cartridge.
The main filter cartridge are made of imported polyester fibers covered with film mulching and
the filtration efficiency can reach up to 99.9%.
The purified gas is further purified by activated carbon layer filter cotton and discharged standard through the air outlet.
Product structure characteristics
¡öFilter unit-- The pre-filter layer, the main filter layer and the chemical filter layer 3 parts to consist.
The pre-filtration layer can adsorb relatively big particles in the airflow to avoid the ealier blockage of
the |
| Company: |
Qingdao Yehua Plastic Machinery Co., Ltd
|
| Contact: |
Mr. Kevin Wang |
| Address: |
North of Jiaoxi Xiaohang, West Outer Ring Road, Jiaozhou, Qingdao, China |
| Postcode: |
266300 |
| Tel: |
86 13475321128 |
| Fax: |
86 13475321128 |
| E-mail: |
|
|
|
|
Home
